Changing Engine Crankcase Filter Element

Remove filter element (A) and clean mounting surface (B).

Apply a thin film of oil to sealing ring (C) of new filter. Tighten new filter element until sealing ring touches mounting surface and then turn an additional ³ / ₄ to 1 ¹ / ₄ turns. Do not overtighten!

Start engine and check base of filter for leaks.

Shut off engine and check oil level.

NOTE: Carry out first oil filter change after first 100 hours of operation.

LX,OMWAR013447 -19-15SEP97-1/1