| Light |
Diagnostic trouble code |
Description |
| red |
TEC 000158.00 |
TEC power supply (unswitched power) too high |
| red |
TEC 000158.01 |
TEC power supply (unswitched power) too low |
| - |
TEC 000628.12 |
TEC controller is connected to the wrong harness connector |
| blue |
TEC 000639.12 |
Tractor CAN BUS fault |
| blue |
TEC 298751.31 |
Fault in the power supply to components at the implement BUS or fault in system voltage (ELX) |
| blue |
TEC 298752.31 |
Fault in the power supply to the components at the implement BUS |
| blue |
TEC 298753.31 |
Fault in the power supply to the implement BUS |
| blue |
TEC 298754.31 |
Fault in the power supply to the implement BUS or fault in system voltage (ELX) |
| yellow |
TEC 298786.04 |
TEC controller system voltage (unswitched power) is missing |
| blue |
TEC 298803.03 |
TEC controller system voltage (ELX) is missing |
| yellow |
TEC 298804.31 |
TEC controller, internal fault (shut-off process) |
| yellow |
TEC 298805.31 |
TEC controller, internal fault (EEPROM) |