Installing the Monitor

Attaching the performance monitor and controls

    There are several possible locations for attaching monitors and controls in the cab:

  • On the front right post.
  • On the center posts.
  • On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.); thread is M10.

Take off the relevant trim and turn it over. The positions where holes may be made are already marked.

LX1036239
LX1036240
LX1036241
LX1036242

OU12401,0001227 -19-24MAY05-1/1