|
Preventing the windows from fogging up
NOTE:
First check that the condensation drain is not blocked.
1.) During the day:
-
Do not blow cold air at the windshield! (do not use "window" mode while running the air-conditioning at "max. cool").
-
If you feel too cool with air-conditioning at "max. cool":
-
Keep the fan running
-
Turn the temperature control to a warmer position
-
Leave the air-conditioning on
-
If you still feel too cold:
-
Keep the fan running
-
Turn the temp. control to a warmer setting (in the red zone)
-
Leave the air-conditioning on
-
If windows fog, slowly turn the temperature control to a "cooler" position until the windows start to clear
-
Before you stop the tractor:
-
Keep the fan running
-
Switch off the air-conditioning
-
Turn the temp. control to a warmer setting or leave it if it already is at "warm"
|
-
Keep the fan running for a couple of minutes to dry the evaporator core
2.) In the morning (if air-conditioning was in use the day before)
-
During the first start-up
-
Set air-flow to "footwell" - NOT to "window"!
-
Run the fan
-
Turn the temp. control to "max. heating" (in the red)
-
If you are not driving the tractor, it may help to open the cab door or window
-
As soon as hot, dry air comes out the louvers:
-
Set air-flow to "window" - this will defog the windows
-
When the windows are clear:
-
Set air-flow and temperature to a comfortable setting
-
If ambient humidity is high or there is moisture inside the cab
-
With the temperature regulator set to "warm", switch the air-conditioning on at the dehumidify switch for special operation (cactus symbol).
|