The SIC (E-SCV / E-ICV control unit) controls the E-SCVs and E-ICVs (selective control valves and independent control valves).
|
| Light |
Diagnostic trouble code |
Brief description |
Description |
| blue |
SIC |
000177.01 |
Selective control valves (ICV/SCV) |
ICVs/SCVs inoperative. Hydraulic oil is too cold. Wait until oil has warmed up. |
| blue |
SIC |
523869.18 |
ICV I |
ICV I inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523870.18 |
ICV II |
ICV II inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523871.18 |
ICV III |
ICV III inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523887.18 |
SCV I |
SCV I inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523888.18 |
SCV II |
SCV II inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523889.18 |
SCV III |
SCV III inoperative. Wait until oil has warmed up. |
| blue |
SIC |
523893.18 |
SCV IV |
SCV IV inoperative. Wait until oil has warmed up. |
If other diagnostic trouble codes appear, one of the tractor's sub-assemblies is either not working properly or not working at all. Make a note of the code and contact your dealer. |