The UIC (User Interface Control Unit) processes the various commands given by the operator with regard to speed and direction of travel.
|
| Light |
Diagnostic trouble code |
Brief description |
Description |
| yellow |
UIC |
000606.16 |
Engine |
Engine speed too high. Reduce ground speed. |
| blue |
UIC |
001504.30 |
Controls |
Before driving, actuate brake or clutch and move to park position. |
| blue |
UIC |
001504.31 |
Controls |
Before driving, sit on seat or actuate brake or clutch and move to park position. |
| blue |
UIC |
001713.15 |
Hydraulic oil filter blocked |
Filter needs to be changed soon. |
| yellow |
UIC |
001713.16 |
Hydraulic oil filter blocked |
Change filter. |
| blue |
UIC |
523956.31 |
Controls |
When starting, move lever to forward or reverse. Shift to park position and start again. |
| yellow |
UIC |
523957.31 |
Electrical system |
When starting, move lever to forward or reverse. Shift to park position and start again. |
| blue |
UIC |
523960.31 |
Controls |
Before driving, sit on seat or actuate brake or clutch and move to park position. |
| blue |
UIC |
523966.11 |
Transmission's come-home mode is active. |
Restart. |
| blue |
UIC |
523966.14 |
Transmission's come-home mode is active. |
Select direction of travel. |
| blue |
UIC |
523966.31 |
Transmission's come-home mode is active. |
Move lever to park position or neutral. |
| yellow |
UIC |
524020.31 |
Controls |
When starting, move lever to forward or reverse. Shift to park position and start again. |
| blue |
UIC |
524180.07 |
Transmission's come-home mode is active. |
To stop, press clutch. |
| blue |
UIC |
524180.14 |
Transmission's come-home mode is active. |
Press clutch. |
| blue |
UIC |
524180.31 |
Transmission's come-home mode is active. |
Release clutch. |
| blue |
UIC |
524190.14 |
Transmission |
Slip control is active. |
| blue |
UIC |
524193.14 |
Transmission oil temperature is low. |
Vehicle does not operate until oil is warm. |
| blue |
UIC |
524193.31 |
Transmission oil temperature is low. |
Shift to park position. |
If other diagnostic trouble codes appear, one of the tractor's sub-assemblies is either not working properly or not working at all. Make a note of the code and contact your dealer. |