Tips on Using Air-Conditioning

Preventing the windows from fogging up

NOTE: First check that the condensation drain is not blocked.

1.) During the day:

• Do not blow cold air at the windshield! (do not use ”window” mode while running the air-conditioning at ”max. cool”).
• If you feel too cool with air-conditioning at ”max. cool”:
  • Keep the fan running
  • Turn the temperature control to a warmer position
  • Leave the air-conditioning on
• If you still feel too cold:
  • Keep the fan running
  • Turn the temp. control to a warmer setting (in the red zone)
  • Leave the air-conditioning on
  • If windows fog, slowly turn the temperature control to a ”cooler” position until the windows start to clear
• Before you stop the tractor:
  • Keep the fan running
  • Switch off the air-conditioning
  • Turn the temp. control to a warmer setting or leave it if it already is at ”warm”
  • Keep the fan running for a couple of minutes to dry the evaporator core

2.) In the morning (if air-conditioning was in use the day before)

• During the first start-up
  • Set air-flow to ”footwell” - NOT to ”window”!
  • Run the fan
  • Turn the temp. control to ”max. heating” (in the red)
  • If you are not driving the tractor, it may help to open the cab door or window
• As soon as hot, dry air comes out the louvers:
  • Set air-flow to ”window” - this will defog the windows
• When the windows are clear:
  • Set air-flow and temperature to a comfortable setting
• If ambient humidity is high or there is moisture inside the cab
  • With the temperature regulator set to ”warm”, switch the air-conditioning on at the dehumidify switch for special operation (cactus symbol).