Changing Engine Oil Filter Element

LX1036524-UN-19OCT05

LX1029276-UN-08JUL02

Remove filter element (A) and clean mounting surface (B). If necessary, replace the dust seal on the contact surface with a new one. Make sure that the lugs on the dust seal engage in the recesses in the contact surface of the filter element.

Apply a thin film of oil to sealing rings (C) of new filter. Install new filter and tighten by hand.

Start engine and check base of filter for leaks.

Shut off engine and check oil level.

NOTE: Carry out first oil filter change after first 100 hours of operation.