Installing the Monitor

LX1036239-UN-03JUN05

LX1036240-UN-03JUN05

LX1041432-UN-20NOV06

LX1036242-UN-03JUN05

Attaching the performance monitor and controls

There are several possible locations for attaching monitors and controls in the cab:

• On the front right post.
• On the center posts.
• On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.) - M10 thread

Take off the relevant trim and turn it over. The positions where holes may be drilled are already marked on the inside.