Tread Settings —MFWD Hi-Crop Tractors

RW26518-UN-01SEP99

NOTE: Tread settings are measured at bottom centerline of tire. Positions in the shaded areas are not used. Wheel, as viewed from behind left front tire.

Use diagram as a guide to adjust the rim and disk to desired tread setting with 320/90 tires.

IMPORTANT: After setting wheel spacing, tighten rim-to-disk bolts and disk-to-hub nuts to 600 Nm (445 lb-ft).

Adjust fenders and steering stops as required.

	Valve Stem Out	Valve Stem In		Valve Stem Out	Valve Stem In
A—	1524 mm (60 in.)	—	I—	1930 mm (76 in.)	—
B—	—	—	J—	—	—
C—	—	—	K—	—	—
D—	1626 mm (64 in.)	—	L—	2032 mm (80 in.)	—
E—	—	1727 mm (68 in.)	M—	—	2134 mm (84 in.)
F—	—	—	N—	—	—
G—	—	—	O—	—	—
H—	—	1829 mm (72 in.)	P—	—	2235 mm (88 in.)