ComfortCommand Seat

IMPORTANT: If single lever control is installed on CommandARM™, lever may contact right-hand console if seat is placed in full right-hand swivel position. Check seat swivel as well as seat height and fore-aft adjustment to avoid this contact.

RXA0090742-UN-11SEP06

A - Lumbar Support

B - Flip-Up Armrest

C - Seat Height Adjustment

D - Armrest Adjustment

E - Backrest Angle

F - Seat Swivel

G - Fore-Aft Adjustment

H - Suspension Shock Dampening

I - Lateral Movement Lock

J - Fore-Aft Movement Lock

Lumbar Support Adjustment: Rotate lever (A) to any of five positions.

Weight and Height Adjustment: Turn key to ON position. Press lower portion of switch (C) to lower the seat or upper portion to raise the seat to adjust for individual weight and height.

Armrest Height Adjustment: Turn handle (D) to adjust armrest height.

Backrest Angle: Pull up handle (E) and lean on backrest to recline seat to desired angle.

Seat Swivel: Lift up on handle (F) to detent position to allow seat to swivel. Push down on handle to lock seat in position.

Fore-Aft Seat Position: Pull up on handle (G) to allow the seat to slide forward or backward.

Fore-Aft Movement Lock: Push down on handle (J) to allow seat to move fore and aft. Pull up to prevent fore-aft movement.

Dampening: Handle (H) infinitely adjusts suspension shock. Moving lever to farthest down position provides the firmest ride; farthest up position provides softest ride.

Lateral Movement Lock: Push down on handle (I) to allow seat to move sideways. Pull up on handle to lock seat in position.