Transmission Description

CAUTION: Avoid personal injury or damage to the tractor. If the engine starts with the shift lever in gear, there is a malfunction of the starting circuit. Repair should be made immediately by your John Deere dealer.

Always place shift lever in PARK position before dismounting.

IMPORTANT: Prevent transmission or clutch damage:

Never rest foot on the clutch pedal while tractor is moving

Do not allow tractor to coast by disengaging clutch or shifting transmission into neutral

Never attempt to start tractor by towing or pushing

Always stop tractor completely before shifting transmission to PARK position

Avoid excessive ballast

Avoid continuous operation under full throttle and full load conditions below 1800 rpm

Description

Three transmission options are available:

PowrQuad PLUS ™ Transmission provides 16 forward and 16 reverse speeds. Left-hand reverser provides fully modulated shift capability between forward and reverse. Four power-shiftable gears can be shifted manually on-the-go using upshift/downshift switches. Range lever provides four or five fully synchronized ranges shiftable on-the-go. Creeper option is available.

AutoQuad PLUS™ Transmission provides 24 forward and 24 reverse speeds or 20 forward and 20 reverse speeds. Left-hand reverser provides fully modulated shift capability between forward and reverse. Range lever provides five or six fully synchronized ranges shiftable on-the-go. Four power-shiftable gears can be shifted manually using upshift/downshift switches or automatically using Auto shift enable/resume switch. In AUTO mode, gear changes within a selected range are performed automatically depending on engine speed and throttle position. Creeper option is available.

Infinitely Variable Transmission (IVT)™ provides an infinite range of ground speeds in both forward and reverse modes.