Adjusting Toe-In on Two-Wheel Drive Front Axle

RW55002A
RW55002A-UN-02AUG99

RW55003
RW55003-UN-25JUN93

A - Tie Rod Screws

B - Clamp

  1. Remove screws (A) from tie-rod tube and loosen clamp (B).

  2. Rotate tube to lengthen or shorten tie-rod. Adjust toe-in to 3 - 9 mm (0.12 - 0.35 in.).

  3. Re-install the screws, tighten the nuts to 61 Nm (45 lb.-ft.) and tighten clamp to 68 Nm (50 lb.-ft.).

OULXBER,00018F0-19-20100611