Installing the Monitor

LX1043852-UN-19SEP07

LX1043853-UN-19SEP07

LX1043854-UN-19SEP07

LX1043855-UN-19SEP07

Attaching the performance monitor and controls

There are several possible locations for attaching monitors and controls in the cab:

• On the front right post.
• On the center posts.
• On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.) - M10 thread

Take off the relevant trim and turn it over. The positions where holes may be made are already marked.