Every 6000 Hours

L112126-UN-05SEP94

Have valve clearance, glow plug resistance and viscous fan drive checked by your John Deere dealer. Drain, flush out and refill the cooling system*. Drain and refill the front-wheel drive axle. Drain and refill the transmission/hydraulic system and clean the intake screen. Change the transmission/hydraulic oil filter. Change engine air cleaner element and cab air filters. Drain and refill engine crankcase. Replace engine crankcase filter element. Replace fuel filter. Lubricate rear axle bearings. Check air intake hoses. Check engine ground connection. Check cab ground connection. Check engine drive belt. Drain residue from fuel tank. Clean battery and check electrolyte level. Lubricate the front axle. Lubricate front-wheel drive axle/drive shafts. Lubricate three-point hitch. Lubricate pivoting fenders. Check neutral start circuit. Tighten wheel retaining bolts. Check brakes. Tighten the screws on the front loader bracket. Check components of swinging drawbar for wear.

*If COOL-GARD II is used, perform this service after no more than 6000 hours or every 6 years.