Electrical Starting Aid

LX1054650-UN-01FEB12

CAUTION: Never use Ether starting fluid when starting the engine with an electrical starting aid.

It depends on fuel temperature whether and for how long the electrical starting aid is activated.

Turn the key clockwise to the ON position.

If the indicator light for electrical starting aid glows after the indicator light test has been finished, wait until it turns off, then start the tractor.

IMPORTANT: If the engine fails to catch, do not operate the starter for more than 30 seconds at a time. If engine does not start, turn the key to the OFF position and wait at least one minute before trying again.

Start the engine and run for several minutes to reach the operating temperature. At temperatures below 0 °C (32 °F), extend warm-up period accordingly.