Service (Daily / Every 10, 250 and 500 Hours)

Service procedure

Every 10 hours or daily

After the first 100 hours

Every 250 hours

Every 500 hours

Lights - Check that all lights (including headlights) are functioning properly

•

     

Fuel system - Drain water and sediment from fuel filter

•

     

Engine - Remove any dirt from area surrounding the engine

•

     

Cooling system/air conditioning system - Clean the radiator and condenser, fins and screens

•

     

Air brake system - Check compressed air tank for condensed water. If condensed water drains out, replace air-drier cartridge, otherwise do this every 1500 hours or every 2 years at the latest (see Service - Every 1500 Hours or 2 Years).

•

     

Check brakes

•

     

Oil level - Check the transmission/hydraulic system

•

     

Check the engine oil level

•

     

Cooling system - Check coolant level

•

     

Front hitch - Lubricate cylinder and three-point hitch

•

     

Lubricate all trailer hitches

•

     

Three-point hitch - Lubricate lift links and rockshaft

•

     

Front axle - Lubricate pivot bearing

•

     

Front-wheel drive axle - Lubricate all universal joints including universal-jointed shaft from transmission to front-wheel drive axle

•

     

Front-wheel drive axle with TLS - Lubricate Panhard link and hydraulic cylinder

•

     

Retrieve the diagnostic trouble codes, rectify errors, and then delete the diagnostic trouble codes.

 

•

   

Lights - Check that all lights and headlights are functioning properly.

 

•

   

Cab - Cab support, check torques of fixing screws (see Service - Every 250 Hours).

 

•

   

Drawbar - Check torque on attaching screws (see Service - Every 250 Hours).

 

•

   

Height-adjustable trailer hitch - Check torque on attaching screws (see Service - Every 250 Hours).

 

•

   

Trailer hitch - Check torques of attaching screws (see Service - Every 250 Hours).

 

•

   

Pick-up hitch - Check torque on attaching screws (see Service - Every 250 Hours).

 

•

   

John Deere™ front loader mounting frame - Check torques of attaching screws (see operator's manual and installation instructions of the front loader)

 

•

   

Front hitch - Attaching frame, check torque on attaching screws (see Service - Every 250 Hours).

 

•

   

Front PTO - Have torque on torsion damper attaching screws checked by your John Deere™ dealer.

 

•

   

Air intake hoses - Check for leaks (see Service - Every 250 Hours).

 

•

   

Hydraulic system - Replace hydraulic oil filter (see Service - Every 750 Hours).

 

•

   

Transmission - Replace transmission oil filter (see Service - Every 750 Hours).

 

•

   

Front-wheel drive axle - Final drives with multi-disk brake, oil change (see Service - Every 750 Hours).

 

•

   

Front wheel drive axle - Final drives without brake, oil change (see Service - Every 1500 Hours or 2 Years).

 

•

   

Front wheel drive axle - Axle housing, oil change (see Service - Every 1500 Hours or 2 Years).

 

•

   

Retrieve the diagnostic trouble codes, rectify errors, and then delete the diagnostic trouble codes

   

•

 

Check neutral start circuit

   

•

 

PTO actuation - Check safety circuit

   

•

 

Lights - Check settings of headlights

   

•

 

Load center - Visually inspect and clean

   

•

 

Fuel system - Drain water and sediment from fuel tank

   

•

 

Wheels - Front and rear wheels, check torques of attaching screws

   

•

 

Wheels - Wheel dish to rim, check torques of attaching screws

   

•

 

Wheels - Wheel weights, check torques of attaching screws

   

•

 

Wheels - Dual wheel attachment, check torques of attaching screws (see manufacturer's specifications)

   

•

 

Cab - Cab support, check torques of attaching screws

   

•

 

Cab - Ground cable, check torque of fixing screws

   

•

 

Drawbar - Check torques of attaching screws

   

•

 

Height-adjustable trailer hitch - Check torques of attaching screws

   

•

 

Trailer hitch - Check torques of attaching screws

   

•

 

Pick-up hitch - Check torques of attaching screws

   

•

 

Front hitch - Mounting frame, check torques of attaching screws

   

•

 

Check oil level - Front-wheel drive axle, axle housing

   

•

 

Check oil level - Front-wheel drive axle, final drives

   

•

 

Check oil level - Front PTO

   

•

 

Air intake hoses - Check for leaks

   

•

 

Foot brake - Operational check

   

•

 

Emergency brake - Operational check

   

•

 

Park lock - Operational check

   

•

 

Trailer hitches - Check all components for wear; check that all components function properly

   

•

 

Air brake system - Check the time needed for filling

   

•

 

Air brake system - Check function of park position (park lock)

   

•

 

Air brake system - Visual inspection and operational check of couplers

   

•

 

Front axle without front-wheel drive - Lubricate the grease fittings

   

•

 

Lubricate pivoting fenders, and perform operational check

   

•

 

Rear PTO - Lubricate PTO stub shaft support (with turnable PTO stub shaft)

   

•

 

Check that all accessible ground cables are secure

     

•

Engine - Check drive belt for wear (rubbing)

     

•

Engine - Change engine oil filter

     

•

Engine - Change engine oil

     

•

Fuel system - Change fuel filter

     

•

Change the activated carbon filter of the cab, if equipped.

     

•

John Deere™ front loader mounting frame - Check torques of attaching screws (see operator's manual and installation instructions of the front loader)

     

•

Lubricate rear axle bearings

     

•

OULXA64,0002B38-19-20151006