Installing the Monitor

LX1018216-UN-24OCT97

LX1019361-UN-15MAY98

LX1029298-UN-05AUG02

LX1019362-UN-21APR98

Attaching the performance monitor and controls

There are several possible locations for attaching monitors and controls in the cab:

• On the front right post.
• On the center posts.
• On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.); thread is M10.

Take off the relevant trim and turn it over. The positions where holes may be made are already marked.