Engine - Change the Oil Filter

LX1045662-UN-14OCT10

LX1029276-UN-08JUL02

Remove filter element (A) and clean mounting surface (B). If necessary, replace the dust seal on the mounting surface with a new one. Make sure that the lugs on the dust seal engage in the recesses in the mounting surface of the filter element.

Apply a thin film of oil to sealing rings (C) of new filter. Install new filter and tighten by hand.

Start engine and check base of filter for leaks.

Shut off engine and check oil level.

NOTE: Carry out first engine oil filter change after first 100 hours of operation.