Rear PTO, Lubricate Stub Shaft Support

LX1045860-UN-09FEB11

CAUTION: Engage park and shut off engine. Remove the ignition key to prevent unauthorized operation.

Remove impurities from PTO stub shaft.

Use pliers to compress snap ring (A), and remove the PTO stub shaft together with the snap ring.

Lubricate the stub shaft support using John Deere™ SD POLYUREA GREASE.

Place snap ring (A) in the groove of PTO stub shaft and compress it with pliers, then install the stub shaft in the PTO housing. Make sure snap ring (A) is seated correctly.