Front-Wheel Drive Axle - Check Oil Level in Axle Housing

LX1053444-UN-04JUN12

CAUTION: If the oil is hot, it may be under pressure. Unscrew the level screw plug slowly.

Unscrew level screw plug (A). Oil must be level with level bore. Fill to proper level, if necessary. Tighten level plug to 90 Nm (66 lb-ft). Always use a transmission oil listed in the Fuel, Lubricants, Hydraulic Oil and Coolant section.

NOTE: The position of the level screw plugs varies depending on axle type.