Power Outlet Sockets

LX1056655-UN-02JUL12

LX1056656-UN-02JUL12

LX1056657-UN-02JUL12

LX1056658-UN-02JUL12

LX1056722-UN-23JUL12

12-volt Socket without Cigarette Lighter

LX1056659-UN-02JUL12

12-volt Socket with Cigarette Lighter

A — Socket for GreenStar™ display

A GreenStar™ display may be connected to socket (A).

B — ISOBUS socket in cab

An implement monitor meeting ISO Standard 11783 may be connected to socket (B).

C — 3-terminal power outlet socket

Terminal 15/30 of the 3-terminal power outlet socket provides a max. permanent direct current of 25 amps. Terminal 82 provides a max. permanent direct current of 5 amps. Terminal 31 is ground.
Turn key in key switch to the right to supply power to terminal 82. Terminal 15/30 is supplied with power even when the ignition is switched off.

IMPORTANT: Electrical equipment requiring high current inputs may be operated, and the use of multiple power outlets is permitted, but the supply circuit must never be overloaded. Remember, total load comprises the sum of all the current consumers connected to the on-board circuit at any one time. This also applies if the consumers are connected to the on-board circuit at different sockets.

D — Signal socket according to ISO Standard 11786

The 7-terminal signal socket (D) is protected by a 10-amp fuse.

Pin	Wire color	Description
1	Red	Ground speed determined by radar
2	Brown	Wheel speed
3	Orange	Rear PTO speed
4	Yellow	Implement switch
5	—	—
6	Red	Power supply, 10 amp, max. 120 watt
7	Black	Ground

E — 12-volt power outlet socket (max. 120 watt)

An electrical consumer with a requirement for max. 120 watt can be connected to the 12-volt socket or to the cigarette lighter.