Checking and Adjusting Toe-In

The ballast of the tractor can influence the set toe-in. If a front ballast larger than 1150 kg is used permanently, the toe-in has to be checked, and readjusted if necessary.

Correct toe-in adjustment has a positive effect on driving characteristics and tire wear.

IMPORTANT: If the tractor is driven continuously with high ballast weight, it is necessary to check the toe-in before startup. When doing so, the toe-in has to be determined with total ballast.

NOTE: Prescribed adjustment lies between -1.5 mm and +1.5 mm (-0.06 in. and +0.06 in.). It is recommended to contact a John Deere™ dealer to have toe-in checked and adjusted.