Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 2 Positions - Tractor 6170M

LX1057502
LX1057502-UN-26MAY15

Two-Piece Front Axle

LX1053400
LX1053400-UN-07MAR12


IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 750” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2.55 m (100 in.).

   

Tread width setting
on delivery

Tread width setting (front wheels)

Arrangement of rim and wheel dish

     

Tread width setting
on delivery

Tread width setting (front wheels)

Arrangement of rim and wheel dish

Tires:

1

2

 

Tires:

1

2

16.9R30

mm

1910

1910

1622

 

540/65R30

mm

1910

1910

1622*

(in.)

(75.20)

(75.20)

(63.86)

(in.)

(75.20)

(75.20)

(63.86)*

16.9R30

mm

1910

1910

1626

 

540/65R30

mm

1910

1910

1626*

(in.)

(75.20)

(75.20)

(64.02)

(in.)

(75.20)

(75.20)

(64.02)*

420/85R30

mm

1910

1910

1622

 

540/65R30 -R4

mm

1910

1910

1622*

(in.)

(75.20)

(75.20)

(63.86)

(in.)

(75.20)

(75.20)

(63.86)*

420/85R30

mm

1910

1910

1626

 

540/65R30 -R4

mm

1910

1910

1626*

(in.)

(75.20)

(75.20)

(64.02)

(in.)

(75.20)

(75.20)

(64.02)*

480/70R30

mm

1910

1910

1622

 

600/65R28

mm

1880

1880

1658*

(in.)

(75.20)

(75.20)

(63.86)

(in.)

(74.02)

(74.02)

(65.28)*

480/70R30

mm

1910

1910

1626

 

600/65R28

mm

2000

2000**

1538**

(in.)

(75.20)

(75.20)

(64.02)

(in.)

(78.74)

(78.74)**

(60.55)**

* Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle.

** Total vehicle width larger than 2.55 m (100 in.); the regional road traffic licensing regulations must be observed.

OULXA64,0002C09-19-20151007