Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 16 Positions - Tractor 6170M

LX1057502
LX1057502-UN-26MAY15

Two-Piece Front Axle


IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 750” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2.55 m (100 in.).

LX1053419
LX1053419-UN-16MAR12

Front-Wheel Tread Adjustment with Rims for 16 Positions / Positions 1 to 8


   

Tread width setting
on delivery

Tread width setting (front wheels)

Arrangement of rim and wheel dish

Tires:

1

2

3

4

5

6

7

8

16.9R30

mm

1910

2114**

2084**

2050**

2020

1910

1880

1846

1816

(in.)

(75.20)

(83.23)**

(82.05)**

(80.71)**

(79.53)

(75.20)

(74.02)

(72.68)

(71.50)

420/85R30

mm

1910

2114**

2084**

2050

2020

1910

1880

1846

1816

(in.)

(75.20)

(83.23)**

(82.05)**

(80.71)

(79.53)

(75.20)

(74.02)

(72.68)

(71.50)

480/70R30

mm

1910

2114**

2084**

2050**

2020**

1910

1880

1846

1816

(in.)

(75.20)

(83.23)**

(82.05)**

(80.71)**

(79.53)**

(75.20)

(74.02)

(72.68)

(71.50)

540/65R30

mm

1910

2114**

2084**

2050**

2020**

1910

1880

1846

1816

(in.)

(75.20)

(83.23)**

(82.05)**

(80.71)**

(79.53)**

(75.20)

(74.02)

(72.68)

(71.50)

* Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle.

** Total vehicle width larger than 2.55 m (100 in.); the regional road traffic licensing regulations must be observed.

LX1053420
LX1053420-UN-16MAR12

Front-Wheel Tread Adjustment with Rims for 16 Positions / Positions 9 to 16


   

Tread width setting
on delivery

Tread width setting (front wheels)

Arrangement of rim and wheel dish

Tires:

9

10

11

12

13

14

15

16

16.9R30

mm

1910

1714

1684

1650

1620

1510*

1480*

1446*

1416*

(in.)

(75.20)

(67.48)

(66.30)

(64.96)

(63.78)

(59.45)*

(58.27)*

(56.93)*

(55.75)*

420/85R30

mm

1910

1714

1684

1650

1620

1510*

1480*

1446*

1416*

(in.)

(75.20)

(67.48)

(66.30)

(64.96)

(63.78)

(59.45)*

(58.27)*

(56.93)*

(55.75)*

480/70R30

mm

1910

1714

1684

1650

1620

1510*

1480*

1446*

1416*

(in.)

(75.20)

(67.48)

(66.30)

(64.96)

(63.78)

(59.45)*

(58.27)*

(56.93)*

(55.75)*

540/65R30

mm

1910

1714

1684

1650*

1620*

1510*

1480*

1446*

1416*

(in.)

(75.20)

(67.48)

(66.30)

(64.96)*

(63.78)*

(59.45)*

(58.27)*

(56.93)*

(55.75)*

* Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle.

** Total vehicle width larger than 2.55 m (100 in.); the regional road traffic licensing regulations must be observed.

OULXA64,0002C0B-19-20151007