Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 2 Positions - 6145R

LX1057502-UN-26MAY15

Two-Piece Front Axle

LX1053400-UN-07MAR12

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 745” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish					Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			1	2		Tires:			1	2
13.6R28	mm	1816	1816	1724		480/70R28	mm	1814	1814	1722
	in.	71.50	71.50	67.87			in.	71.42	71.42	67.80
14.9R28	mm	1816	1816	1724		480/70R30	mm	1910	1910	1622
	in.	71.50	71.50	67.87			in.	75.20	75.20	63.86
16.9R24	mm	1816	1816	1720		540/65R24	mm	1816	1816	1720
	in.	71.50	71.50	67.72			in.	71.50	71.50	67.72
16.9R28	mm	1814	1814	1722		540/65R28	mm	1814	1814	1722
	in.	71.42	71.42	67.80			in.	71.42	71.42	67.80
340/85R28	mm	1838	1838	1746		540/65R30	mm	1910	1910	1622**
	in.	72.36	72.36	68.74			in.	75.20	75.20	63.86**
380/70R28	mm	1816	1816	1724		540/65R30 -R4	mm	1910	1910	1622**
	in.	71.50	71.50	67.87			in.	75.20	75.20	63.86**
380/85R28	mm	1838	1838	1746		600/65R28	mm	1814	1814	1724
	in.	72.36	72.36	68.74			in.	71.42	71.42	67.87
400/80R28 -R4	mm	1816	1816	1724		600/65R28	mm	1852	1852	1684**
	in.	71.50	71.50	67.87			in.	72.91	72.91	66.30**
420/70R28	mm	1816	1816	1724		VF 480/65R28	mm	1816	1816	1724
	in.	71.50	71.50	67.87			in.	71.50	71.50	67.87
420/85R24	mm	1838	1838	1742		VF 520/60R28	mm	1816	1816	1726
	in.	72.36	72.36	68.58			in.	71.50	71.50	67.95
420/85R28	mm	1838	1838	1746		VF 520/60R28	mm	1854	1854	1686
	in.	72.36	72.36	68.74			in.	72.99	72.99	66.38
420/85R30	mm	1910	1910	1622		VF 540/65R28	mm	1814	1814	1724
	in.	75.20	75.20	63.86			in.	71.42	71.42	67.87
440/80R24 -R4	mm	1816	1816	1720		VF 540/65R28	mm	1852	1852	1684
	in.	71.50	71.50	67.72			in.	72.91	72.91	66.30
440/80R28 -R4	mm	1814	1814	1722		VF 600/60R28	mm	1904	1904	1634**
	in.	71.42	71.42	67.80			in.	74.96	74.96	64.33**
480/65R28	mm	1816	1816	1724		VF 600/60R30	mm	1904	1904	1638**
	in.	71.50	71.50	67.87			in.	74.96	74.96	64.49**
480/70R24	mm	1816	1816	1720		VF 600/65R28	mm	1904	1904	1634**
	in.	71.50	71.50	67.72			in.	74.96	74.96	64.33**
* Total vehicle width greater than 2,55 m; the regional road traffic licensing regulations must be observed. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127.