Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 8 Positions - 6155R
LX1057502-UN-26MAY15
Two-Piece Front Axle
IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 8 positions.
IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.
IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.
See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 745” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.
NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).
LX1056921-UN-21AUG13
|
Tread width |
Tread widths (front wheels) Arrangement of rim and wheel dish |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Tires: |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
||
|
600/65R28 |
mm |
1880 |
2156* |
2052* |
1880 |
1776 |
1756 |
1652** |
1480** |
1376** |
|
in. |
74.02 |
84.88* |
80.79* |
74.02 |
69.92 |
69.13 |
65.04** |
58.27** |
54.17** |
|
|
* Total vehicle width greater than 2,55 m; the regional road traffic licensing regulations must be observed. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle. |
||||||||||
|
OULXA64,00038BA-19-20160309 |