Two-Piece Front Axle — Tread Widths for Front Wheels with Rims for 16 Positions - 6155R

LX1057502-UN-26MAY15

Two-Piece Front Axle

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 16 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 745” and “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

LX1053419-UN-16MAR12

Tread Widths for Front Wheels with Rims for 16 Positions / Positions 1 to 8

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			1	2	3	4	5	6	7	8
16.9R28	mm	1816	2114*	2084*	2050*	2020	1910	1880	1846	1816
	in.	71.50	83.23*	82.05*	80.71*	79.53	75.20	74.02	72.68	71.50
420/85R28	mm	1840	2138*	2108	2074	2044	1934	1904	1870	1840
	in.	72.44	84.17*	82.99	81.65	80.47	76.14	74.96	73.62	72.44
420/85R30	mm	1912	2116*	2086*	2050	2020	1912	1882	1846	1816
	in.	75.28	83.31*	82.13*	80.71	79.53	75.28	74.09	72.68	71.50
480/70R28	mm	1816	2114*	2084*	2050*	2020*	1910	1880	1846	1816
	in.	71.50	83.23*	82.05*	80.71*	79.53*	75.20	74.02	72.68	71.50
480/70R30	mm	1912	2116*	2086*	2050*	2020*	1912	1882	1846	1816
	in.	75.28	83.31*	82.13*	80.71*	79.53*	75.28	74.09	72.68	71.50
540/65R28	mm	1816	2114*	2084*	2050*	2020*	1910	1880	1846	1816
	in.	71.50	83.23*	82.05*	80.71*	79.53*	75.20	74.02	72.68	71.50
540/65R30	mm	1912	2116*	2086*	2050*	2020*	1912	1882	1846	1816
	in.	75.28	83.31*	82.13*	80.71*	79.53*	75.28	74.09	72.68	71.50
270/95R38	mm	1816	2120	2090	2050	2020	1916	1886	1846	1816
	in.	71.50	83.46	82.28	80.71	79.53	75.43	74.25	72.68	71.50
* Total vehicle width greater than 2.55 m; the regional road traffic licensing regulations or other applicable regulations must be observed. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle.

LX1053420-UN-16MAR12

Tread Widths for Front Wheels with Rims for 16 Positions / Positions 9 to 16

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			9	10	11	12	13	14	15	16
16.9R28	mm	1816	1714	1684	1650	1620	1510**	1480**	1446**	1416**
	in.	71.50	67.48	66.30	64.96	63.78	59.45**	58.27**	56.93**	55.75**
420/85R28	mm	1840	1738	1708	1674	1644	1534	1504**	1470**	1440**
	in.	72.44	68.42	67.24	65.91	64.72	60.39	59.21**	57.87**	56.69**
420/85R30	mm	1912	1716	1686	1650	1620	1512**	1482**	1446**	1416**
	in.	75.28	67.56	66.38	64.96	63.78	59.53**	58.35**	56.93**	55.75**
480/70R28	mm	1816	1714	1684	1650	1620	1510**	1480**	1446**	1416**
	in.	71.50	67.48	66.30	64.96	63.78	59.45**	58.27**	56.93**	55.75**
480/70R30	mm	1912	1716	1686	1650	1620	1512**	1482**	1446**	1416**
	in.	75.28	67.56	66.38	64.96	63.78	59.53**	58.35**	56.93**	55.75**
540/65R28	mm	1816	1714	1684	1650**	1620**	1510**	1480**	1446**	1416**
	in.	71.50	67.48	66.30	64.96**	63.78**	59.45**	58.27**	56.93**	55.75**
540/65R30	mm	1912	1716	1686**	1650**	1620**	1512**	1482**	1446**	1416**
	in.	75.28	67.56	66.38**	64.96**	63.78**	59.53**	58.35**	56.93**	55.75**
270/95R38	mm	1816	1720	1690	1650	1620	1516	1486	1446	1416
	in.	71.50	67.72	66.54	64.96	63.78	59.68	58.50	56.93	55.75
* Total vehicle width greater than 2.55 m; the regional road traffic licensing regulations or other applicable regulations must be observed. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127. See also “Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop” for the relevant front axle.