Three-Piece Front Axle (Version 1) — Tread Widths for Front Wheels with Rims for 2 Positions - 6155R

LX1057503-UN-13MAY15

Three-Piece Front Axle

LX1053400-UN-07MAR12

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 2 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See in this section:

1. “Three-Piece Front Axle (Version 1) — Overview of Axle Category and Axle Type”
2. “Three-Piece Front Axle (Version 1) — Adjust the Fixed Fenders and Steering Stop”
3. “Preventing Front Wheel or Fender Contact with Tractor Components”

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish					Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			1	2		Tires:			1	2
16.9R28	mm	1838	2042	1838		600/65R28	mm	1856	2024*	1856
	in.	72.36	80.39	72.36			in.	73.07	79.68*	73.07
420/85R28	mm	1838	2042	1838		VF 540/65R28	mm	1856	2024*	1856
	in.	72.36	80.39	72.36			in.	73.07	79.68*	73.07
440/80R28 -R4	mm	1838	2042	1838		VF 540/65R30	mm	1856	2024*	1856
	in.	72.36	80.39	72.36			in.	73.07	79.68*	73.07
480/70R28	mm	1838	2042*	1838		VF 600/60R28	mm	1856	2024*	1856
	in.	72.36	80.39*	72.36			in.	73.07	79.68*	73.07
540/65R28	mm	1838	2042*	1838		VF 600/65R28	mm	1856	2024*	1856
	in.	72.36	80.39*	72.36			in.	73.07	79.68*	73.07
* Total vehicle width greater than 2.55 m; the regional road traffic licensing regulations or other applicable regulations must be observed.