Three-Piece Front Axle (Version 2) — Tread Widths for Front Wheels with Rims for 16 Positions - 6155R

LX1057503-UN-13MAY15

Three-Piece Front Axle

IMPORTANT: Comply with instructions on front-wheel tread adjustment with rims for 16 positions.

IMPORTANT: The following tables apply only for wheels that have standard rims. Non-standard rims may be pressed in to different depths. In consequence, the values shown in the tables will NOT be valid.

IMPORTANT: After setting the tread, the fender and the steering stop need to be adjusted. Afterwards oscillate the front axle with fully turned steering. If the wheels or fenders contact tractor components, correct the steering stop.

See in this section:

1. “Three-Piece Front Axle (Version 2) — Overview of Axle Category and Axle Type”
2. “Three-Piece Front Axle (Version 2) — Adjust the Fixed Fenders and Steering Stop”
3. “Preventing Front Wheel or Fender Contact with Tractor Components”

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

LX1053419-UN-16MAR12

Tread Widths for Front Wheels with Rims for 16 Positions / Positions 1 to 8

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			1	2	3	4	5	6	7	8
270/95R38	mm	1810	2280*	2250*	2210	2180	2076	2046	2006	1976
	in.	71.3	89.8*	88.6*	87.0	85.8	81.7	80.6	79.0	77.8
* Total vehicle width greater than 2.55 m; the regional road traffic licensing regulations or other applicable regulations must be observed.

LX1053420-UN-16MAR12

Tread Widths for Front Wheels with Rims for 16 Positions / Positions 9 to 16

		Tread width on delivery	Tread widths (front wheels) Arrangement of rim and wheel dish
Tires:			9	10	11	12	13	14	15	16
270/95R38	mm	1810	1880	1850	1810	1780	1676	1646	1606	1576
	in.	71.3	74.0	72.8	71.3	70.1	66.0	64.8	63.2	62.0
* Total vehicle width greater than 2.55 m; the regional road traffic licensing regulations or other applicable regulations must be observed.