Controls

PC15329-UN-08JUL13

Enable or Disable Controls

From the left-hand side of the Controls Setup page, select one of the following controls:

• Tractor joystick
• ISOBUS joystick
• Tractor functions
• ISOBUS implement

Assignments

NOTE: Certain functions are assigned automatically by implement to specific joystick buttons and cannot be modified by operator.

Depending on the selected control, the following combinations (assignments) are possible:

Tractor joystick

• Input + Source + Function

ISOBUS joystick

• Input + Implement + Function

Tractor functions

• Functions + Device + Input

ISOBUS implement

• Function + Device + Input

PC17393-UN-28MAY14

A - Add or edit assignment

B - Remove assignment

To add or edit any assignment, select the desired control, select Input or Function, and press either Edit or tap anywhere in the selectable area. Once assignment is completed, a status icon is shown.

PC17280-UN-10SEP13

On / Off Toggle

ISO Aux toggle enables ISOBUS joystick messages to be sent to implement.

Set ISO Aux to OFF to deactivate implement functions. Set to ON to activate implement functions and store them in implement.

These functions are stored until operator edits corresponding assignment.

NOTE: If Joystick Mode is set to tractor, the tractor joystick operates tractor functions only.

PC15328-UN-08JUL13

Joystick Mode

Set up tractor joystick for operating tractor functions. Depending on the tractor model and its configuration, the operator can select:

OFF

• Tractor joystick is disabled.

Front or Mid SCVs

• Exclusively operate front/rear or mid/rear SCV functions for 6R tractor.

Tractor Functions

• Operate SCV and (or) Front Hitch tractor functions for 7R, 8R and 9R tractors.

NOTE: SCVs with a default control lever assignment, that are also assigned to a Joystick axis, require Joystick Mode set to either "OFF" or “ISOBUS” to be controlled by control levers.

Loader Mode

Tractor joystick is set up for operating front loader for 6R, 7R, 8R tractors. For more information, refer to tractor SCV advanced settings.