Machine Profile

General Settings

If display detects machine, some information is automatically set by machine controllers. Otherwise, select list box to choose machine type.

Settings specific to certain machine types only appear on page when applicable.

• Articulated Tractor Articulation Point

  Front Axle

  • Distance from articulation point to center of front axle. Articulation point is pivoting point of machine when making a turn.

  Rear Axle

  • Distance from articulation point to center of rear axle. Articulation point is pivoting point of machine when making a turn.
• Track Tractor Center of Rotation

  Center of Rotation

  • Distance from pivot point of machine to rear axle.

GPS Offsets

• GPS Lateral Offset
  • Lateral distance (left or right) from center line of machine to center of GPS receiver. This value is usually set to 0.0 unless GPS receiver is offset left or right of machine center line. Guidance and Mapping applications require GPS Lateral Offset settings.

• GPS Inline Offset
  • Inline distance from center of non-steering axle on machine to center of GPS receiver. Mapping application requires GPS Inline Offset settings.

• GPS Height
  • Vertical distance from GPS receiver to ground.

Connection Offsets

• Inline distance from center of rear axle to connection point. Connection point is location where implement connects to machine. Mapping application requires Connection Offset settings.

Restore Profile to Factory Defaults

Default tractor profile settings are stored in tractor controllers. Changes to these settings are stored in the display. To reset profile to factory defaults, select settings at the top of Machine Profile page. Then, select Reset Profile button.

Use Help Center onscreen help for more information about Equipment Manager and the Machine Profile.