Installing the Monitor

LX1045603
LX1045603-UN-25OCT10

Attachment Points on Rear Right Post

LX1045604
LX1045604-UN-25OCT10

Attachment Points on Rear Left Post

LX1045602
LX1045602-UN-25OCT10

Attachment Points on Front Right Post

Attaching the monitors and controls

    There are several possible locations for attaching monitors and controls in the cab:

  • On the front right post.
  • On the rear posts.

NOTE: Gap between holes at attaching points is 120 mm (4.72 in.); thread is M10.

Take off the relevant trim and turn it over. The positions where holes may be drilled are already marked on the inside.

OULXA64,00025EF-19-20101020