Change Engine Oil Filter

LX1045662-UN-14OCT10

LX1029276-UN-08JUL02

Remove filter element (A) and clean mounting surface (B). If necessary, replace the dust seal on the mounting surface with a new one. Make sure that the lugs on the dust seal engage in the recesses in the mounting surface of the filter element.

Apply a thin film of oil to seal rings (C) of new filter. Screw in new filter and finger-tighten!

After topping up the engine oil, run the engine and check base of filter for leaks.

Stop engine and check the oil level, see “Check Engine Oil Level ”, in Section 90.

NOTE: Always replace the engine oil filter whenever the engine oil is exchanged.