TIA™ - Requirements for PTO

Before transferring control to the implement, perform all necessary steps to prepare the implement as indicated in the operator's manual of the implement.

While operating, implement has ability to engage/disengage PTO and change PTO speed.

The following preconditions have to be met before transferring implement control:

• Operator sitting in seat.
• No PTO system malfunctions.
• PTO remote control off.
• PTO engaged (PTO switch On).

Transfer control using AutoTrac™ resume switch (see implement Operator's Manual).

To withdraw control, turn PTO switch off.

NOTE: Unless the implement is authorized to engage the PTO when the tractor is stationary, the tractor will prevent engagement of the PTO when stationary. Implement is however, allowed to disengage PTO.