TIA™ - Requirements for Guidance

Before transferring control to the implement, perform all necessary steps to prepare the implement as indicated in the operator's manual of the implement.

While operating, implement has ability to automatically steer tractor.

The following preconditions have to be met before transferring implement control:

• Operator sitting in seat.
• Steering system must be functional.
• AutoTrac™ is OFF.
• Steering wheel is not moving.
• Vehicle speed is below maximum automated speed.
• Transmission not in Park.

Transfer control using AutoTrac™ resume switch (see implement Operator's Manual).

To withdraw control:

• Turn steering wheel left or right.
• Move reverse drive lever to Park.