DirectDrive — Come-Home Mode

LX1057574-UN-16JUL12

LX1057575-UN-16JUL12

In the event of a transmission malfunction, the tractor can still be operated at a maximum speed of 22 km/h (13.7 mph) and a maximum engine speed of 1500 rpm.

To do this, stop the engine, pull out plug (A), turn it 90° clockwise, and re-insert it as shown. Then restart the engine.

Refer also to fuses and relays (LCS) with DirectDrive transmission in the Service Section - if necessary.

The clutch pedal must then be used to disengage the park lock, start driving, stop and operate the reverse drive lever.

To change the range, stop the tractor and shift into the desired range.

Comply with instructions on CommandCenter screen.

Changing direction and shifting ranges can be achieved only when stationary and with the clutch pedal depressed.

NOTE: The AutoClutch function is disabled in come-home mode.