Rear Hitch - Transport Mounted Implements

LX1057248-UN-09SEP13

Side Console

LX1057213-UN-22JAN14

CommandARM™

LX1057249-UN-23JAN14

CommandARM™

On an implement without wheels, raise the implement fully using depth control lever (A) or regulator (B) and activate transport lock (C). When the transport lock is activated, the indicator light on button (C) lights up.

IMPORTANT: The mass of the implement may be such that the implement moves up and down slightly even when the transport lock is on and hitch dampening is active.

Always raise the implement high enough to provide sufficient clearance between the implement and the road surface.

NOTE: The transport lock can be enabled across the entire raising height. When raised about 50 %, hitch dampening also becomes active.

For a towed implement, push depth control lever (A) all the way forward to its float position.

NOTE: Using the remote control, the height of the rear hitch can be changed even with activated transport lock.

If the transport lock was activated before switching off the tractor, the transport lock remains enabled when the tractor is restarted.