Selective Control Valves, Electronic - Float Position (Detent)

LX1057295
LX1057295-UN-19SEP13

A - Extend (Click Position)

B - Neutral Position

C - Retract (Click Position)

D - Float Position (Detent)

Move the lever beyond the retract click position and detent it in the float position; the piston of the hydraulic cylinder can move freely and the attached implement can follow the ground contour.

To deactivate the function, move the lever manually back to neutral.

NOTE: Time setting is ignored in float position.

If, before shutting off the engine, the lever is moved to float position (D) and the lever is still in float position (D) at the subsequent startup, the float function remains deactivated until the lever is returned to neutral (B). A lock icon appears on the CommandCenter™ while this applies.

Move the lever back and forward in both directions after it was used in the float position to insure that the hydraulic cylinder is filled with oil.

OULXA64,0003105-19-20141030