Use Video Display Capability Properly

Avoid Backover Accidents

RXA0109491-UN-05AUG10

Avoid Backover Accidents

CAUTION: Before moving machine, be sure that all persons are clear of machine path. Give audible warning by sounding horn. Turn around and look directly for best visibility. Use mirrors to assist in checking all around machine. Keep windows and mirrors clean, adjusted, and in good condition. Use a signal person when backing if view is obstructed or when in close quarters.

Do not rely on a camera to determine if personnel or obstacles are behind the machine. The system can be limited by many factors including maintenance practices, environmental conditions, and operating range.

CAUTION: Do not rely on a camera for collision avoidance or bystander detection. To avoid possible injury or death to operator or others, always remain alert and aware of surroundings when operating machine. Read and understand AVOID BACKOVER ACCIDENTS in this section.

IMPORTANT: Avoid damage to equipment. Correctly understand whether the camera is ”mirrored” and whether the video application is mirrored.

• Mount camera in a sturdy and secure location.
• Understand camera’s field of view.
• Keep camera properly serviced.
• Keep camera lens clean.