Tail Brake Light/Turn Signal on Fender - Change Lamp

1. 
   LX1057371-UN-14NOV13

   
   LX1057372-UN-14NOV13

   Turn Signal Light

   
   LX1057373-UN-15NOV13

   Turn Signal Light

   
   LX1057374-UN-14NOV13

   Turn Signal Light

   
   LX1057375-UN-14NOV13

   Tail Light/Brake Light

   
   LX1057376-UN-14NOV13

   Tail Light/Brake Light

   
   LX1057377-UN-14NOV13

   Tail Light/Brake Light

   A - Screw

   B - Tail/Brake Light/Turn Signal

   C - Connector of the Turn-Signal

   D - Socket of the Turn Signal

   E - Lamp of Turn Signal

   F - Connector of Tail Light and Brake Light

   G - Socket of Tail Light and Brake Light

   H - Lamp of Tail Light and Brake Light

   Switch off lighting and let lamps cool down.

---




2. Remove screws (A) and dismantle tail brake light/turn signal (B).

3. Change lamp of turn signal:

   1. Disconnect connector (C).

   2. Turn the socket (D) counterclockwise and remove it.

   3. Press in the lamp (E) and turn it counterclockwise to remove it from the socket.

   4. Using a clean cloth, position the new lamp in the socket and install it by pressing it in and turning it clockwise.

   5. Position socket (D) in the housing and turn clockwise.

   6. Connect connector (C).

4. Change the lamp of the tail and brake light:

   1. Disconnect connector (F).

   2. Turn the socket (G) counterclockwise and remove it.

   3. Press in the lamp (H) and turn it counterclockwise to remove it from the socket.

   4. Using a clean cloth, position the new lamp in the socket and install it by pressing it in and turning it clockwise.

   5. Position socket (G) in the housing and turn clockwise.

   6. Connect connector (C).

5. Position tail brake light/turn signal (B) and tighten screws (A).