-
Engine - Remove any dirt from area surrounding the engine
-
Cooling system/air-conditioning system - Clean the radiator
and condenser, fins and screens
-
Fuel tank - Drain water and residues
-
Retrieve the diagnostic trouble codes, rectify errors, and then
delete the diagnostic trouble codes
-
Check the movement inhibitor
-
PTO actuation - Check safety device
-
Fuse box - Visually inspect and clean
-
Lights - Check that all lights and headlights are functioning
properly
-
Lights - Check settings of headlights
-
Check that all accessible ground cables are secure
-
Adjustable front axle - Tighten axle bolts
-
Wheels - Front and rear wheels, check torques of attaching screws
-
Wheels - Wheel disk to rim, check torques of attaching screws
-
Wheels - Wheel weights, check torques of attaching screws
-
Wheels - Dual wheel attachment, check torques of attaching screws
-
Drawbar - Check torques of attaching screws
-
John Deere™ front loader mounting frame - Check torques
of attaching screws (see operator's manual and installation instructions
of the front loader)
-
Change fuel filter
-
Change the engine oil filter
-
Change engine oil
-
Change hydraulic filter
-
Change transmission oil filter *
-
Front-wheel drive axle - Final drives with brake, oil change
-
Cab - Activated carbon filter (if equipped) **
-
Cab suspension - Have accumulator charged by an authorized dealer
|
-
Engine - Check drive belt for wear (rubbing)
-
Cooling system - Coolant level
-
Check air intake hoses for leaks
-
Front-wheel drive axle - Final drives without brake, oil level
-
Front-wheel drive axle - Axle housing, oil level
-
Transmission/Hydraulic system - Oil level
-
Check leak oil tanks (if equipped)
-
Brake system - Bleed and check
-
Foot brake - Operational check
-
Cab - Check all rubber seals of the doors and windows as well
as the cable feedthroughs for proper seating, wear, and brittleness.
-
Cab - Check function of all closing mechanisms of the doors
and windows.
-
Check all trailer hitches for wear; check that all trailer hitches
function properly
-
Park lock - Operational check
-
Adjustable front axle - Lubricate the grease fittings
-
Front-wheel drive axle - Lubricate pivot bearing
-
Front-wheel drive axle - Lubricate all universal joints including
universal-jointed shaft from transmission to front-wheel drive axle
-
Suspended front-wheel drive axle - Lubricate hydraulic cylinder
-
Lubricate pivoting fenders
-
Universal-jointed shaft between engine and transmission (if
equipped) - Lubricate all U-joints
-
Cab suspension - Lubricate the lubrication points
-
Three-point hitch - Lubricate lift links and rockshaft
-
Lubricate the rear axle bearings (if equipped)
-
Lubricate the draft link bearings (if equipped)
-
Rear PTO - Lubricate PTO stub shaft support (with turnable PTO
stub shaft)
|
