Tread Widths on Rear Wheels - Rack-and-Pinion Axle (6145R)

LX1056800-UN-29OCT12

Tread Widths on Rear Wheels - Rack-and-Pinion Axle

IMPORTANT: Comply with tread adjustment instructions, and tighten wheel bolts. See Tighten Rear Wheel Bolts (with Rack-and-Pinion Axle).

IMPORTANT: After adjusting tread, check that the wheels can turn freely.

Do NOT let tires come into contact with draft links or lift links. The gap between lift links and tires can be increased by installing the lift links in the front holes of the draft links.

When draft links are raised (even if no implement is attached), the hydraulic or mechanical stabilizer bars must be locked.

If there is still contact with the draft links or lift links despite all these measures, tread width must be increased.

NOTE: In certain countries, overall vehicle width for driving on public roads must not exceed 2,55 m (100 in.).

		Tread widths (rear wheels) Arrangement of rim and wheel dish
			Short rack-and-pinion axles	Medium rack-and-pinion axles	Long rack-and-pinion axles
Tires:		Minimum (1)	Maximum (2)	Maximum (2)	Maximum (2)
14.9R46	mm	1526	2294	2550	—
	in.	60.1	90.3	100.4
18.4R42	mm	1585	2294	2550	—
	in.	62.4	90.3	100.4
18.4R42 -R2	mm	1585	2294	2550	—
	in.	62.4	90.3	100.4
320/90R50	mm	1526	2294	2550	—
	in.	60.1	90.3	100.4
420/80R46	mm	1531	2294	2550	—
	in.	60.3	90.3	100.4
480/80R38	mm	1597	2294	2550	—
	in.	62.9	90.3	100.4
480/80R42	mm	1597	2294	2550	—
	in.	62.9	90.3	100.4
520/85R38	mm	1637	2294	2550	—
	in.	64.4	90.3	100.4
650/65R38	mm	1777	2294	2550	—
	in.	70.0	90.3	100.4