Tread Widths on Rear Wheels - Rack-and-Pinion Axle (6215R)

LX1056800-UN-29OCT12

Tread Widths on Rear Wheels - Rack-and-Pinion Axle

IMPORTANT: Comply with tread adjustment instructions, and tighten wheel bolts. See Tighten Rear Wheel Bolts (with Rack-and-Pinion Axle).

IMPORTANT: After adjusting tread, check that the wheels can turn freely.

Do NOT let tires come into contact with draft links or lift links. The gap between lift links and tires can be increased by installing the lift links in the front holes of the draft links.

When draft links are raised (even if no implement is attached), the hydraulic or mechanical stabilizer bars must be locked.

If there is still contact with the draft links or lift links despite all these measures, tread width must be increased.

		Tread widths (rear wheels) Arrangement of rim and wheel dish
			Short rack-and-pinion axles	Medium rack-and-pinion axles	Long rack-and-pinion axles
Tires:		Minimum (1)	Maximum (2)	Maximum (2)	Maximum (2)
18.4R46 -R2	mm	1614	2302	2558	2764
	in.	63.5	90.6	100.7	108.8
320/90R54	mm	1618	2306	2562	2768
	in.	63.7	90.8	100.9	109.0
380/90R50	mm	1614	2302	2558	2764
	in.	63.5	90.6	100.7	108.8
480/80R46	mm	1614	2302	2558	2764
	in.	63.5	90.6	100.7	108.8
520/85R42	mm	1637	2302	2558	2764
	in.	64.4	90.6	100.7	108.8
520/85R42 -R2	mm	1637	2302	2558	2764
	in.	64.4	90.6	100.7	108.8
620/70R42	mm	1755	2302	2558	2764
	in.	69.1	90.6	100.7	108.8
650/85R38	mm	1777	2302	2558	2764
	in.	70.0	90.6	100.7	108.8
710/70R38	mm	1796	2302	2558	2764
	in.	70.7	90.6	100.7	108.8