Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 745

IMPORTANT: Observe the following points in this Section:

• “Two-Piece Front Axle — Notes on Adjusting the Fenders”

• “Two-Piece Front Axle — Notes on Adjusting the Steering Stop”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor.

IMPORTANT: A depth of at least 10 mm (0.394 in.) to which the steering stops are screwed in, or five screw rotations, needs to be ensured.

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Preventing Front Wheel or Fender Contact with Tractor Components” in this Section.

IMPORTANT: For setting values for steering stop with two **, the tread width and adjustment of the steering stop is possible only with steering stop AL180127.

NOTE: For front loader work, select a tread width between 1750 - 1950 mm (68.9 - 76.8 in.). The recommended tread widths are listed in the table and marked by an *.

Tire size	SRI [mm]	Tread width [mm]	Fenders		Positions at which fender can be installed						Steering Stop [mm]
			Width [mm]	Length [mm]	I	II	III	IV	V [mm]	VI
14.9R28	650	1621	420	1440	B-1-IN	C3-D1	TIRE	UP	80	CTR	64
		1713	420	1440	D-2-IN	C3-D1	TIRE	UP	100	CTR	38
		1817*	420	1440	C-1-OUT	C3-D1	TIRE	UP	100	CTR	26
		1909	420	1440	D-1-OUT	C3-D1	TIRE	UP	100	CTR	26
		2021	420	1440	C-2-OUT	C3-D1	TIRE	UP	120	CTR	26
		2113	420	1440	D-2-OUT	C3-D1	TIRE	UP	120	CTR	26
16.9R24	625	1714	480	1440	E-2-IN	C4-D2	TIRE	UP	120	OUT	40
		1818*	480	1440	C-2-IN	C4-D2	TIRE	UP	120	OUT	40
		1910	480	1440	A-2-IN	C4-D2	TIRE	UP	120	OUT	26
		2022	480	1440	B-2-OUT	C4-D2	TIRE	UP	150	OUT	26
		2114	480	1440	C-2-OUT	C4-D2	TIRE	UP	150	OUT	26
16.9R28	675	1712	480	1440	D-2-IN	D4-E2	CTR	DOWN	60	OUT	62
		1816*	480	1440	B-1-OUT	D4-E2	TIRE	DOWN	80	OUT	38
		1908	480	1440	C-1-OUT	D4-E2	TIRE	DOWN	80	OUT	31
		2020	480	1440	B-2-OUT	D4-E2	TIRE	DOWN	80	OUT	26
		2112	480	1440	C-2-OUT	D4-E2	TIRE	DOWN	100	OUT	26
16.9R28/R2	700	1594	480	1440	C-1-IN	D3-E1	TIRE	DOWN	40	OUT	100**
		1696	480	1440	E-2-IN	D3-E1	TIRE	DOWN	40	OUT	77
		1798*	480	1440	C-2-IN	D3-E1	TIRE	DOWN	60	OUT	52
		1900	480	1440	A-2-IN	D3-E1	TIRE	DOWN	60	OUT	36
		2000	480	1440	A-2-OUT	D3-E1	TIRE	DOWN	60	OUT	28
		2102	480	1440	C-2-OUT	D3-E1	TIRE	DOWN	80	OUT	26
16.9R30	700	1720	480	1440	E-2-IN	D3-E1	TIRE	DOWN	40	OUT	69
		1812	480	1440	C-2-IN	D3-E1	TIRE	DOWN	60	OUT	47
		1916*	480	1440	D-1-OUT	D3-E1	TIRE	DOWN	60	OUT	32
		2016	480	1440	B-2-OUT	D3-E1	TIRE	DOWN	60	OUT	26
		2120	480	1440	D-2-OUT	D3-E1	TIRE	DOWN	80	OUT	26
16.9R30/R2	725	1511	480	1440	E-1-IN	C4-D2	TIRE	DOWN	40	OUT	118**
		1613	480	1440	C-1-IN	C4-D2	TIRE	DOWN	40	OUT	99**
		1713	480	1440	E-2-IN	C4-D2	TIRE	DOWN	40	OUT	82
		1815*	480	1440	B-1-OUT	C4-D2	TIRE	DOWN	40	OUT	57
		1917	480	1440	D-1-OUT	C4-D2	TIRE	DOWN	40	OUT	69
		2019	480	1440	B-2-OUT	C4-D2	TIRE	DOWN	40	OUT	29
		2121	480	1440	D-2-OUT	C4-D2	TIRE	DOWN	60	OUT	26
320/85R34	675	1594	370	1280	D-2-IN	D5-E3	CTR	UP	0	IN	65
		1696	370	1280	A-1-OUT	D5-E3	TIRE	UP	0	IN	40
		1798*	370	1280	C-1-OUT	D5-E3	TIRE	UP	0	IN	26
		1900	370	1280	B-2-OUT	D5-E3	TIRE	UP	0	IN	26
		2000	370	1280	D-2-OUT	D4-E2	TIRE	DOWN	100	IN	26
		2102	370	1280	E-2-OUT	D4-E2	TIRE	DOWN	100	IN	26
320/85R38	725	1513	370	1280	C-1-IN	C4-D2	TIRE	DOWN	40	IN	99**
		1601	370	1280	E-2-IN	C4-D2	TIRE	DOWN	40	IN	79
		1717	370	1280	B-1-OUT	C4-D2	TIRE	DOWN	40	IN	52
		1847*	370	1280	A-2-OUT	C4-D2	TIRE	DOWN	40	IN	34
		1919	370	1280	B-2-OUT	C4-D2	TIRE	DOWN	40	IN	26
		2021	370	1280	D-2-OUT	C4-D2	TIRE	DOWN	60	IN	26
		2123	370	1280	E-2-OUT	C4-D2	TIRE	DOWN	60	IN	26
380/85R28	650	1621	420	1440	B-1-IN	C3-D1	TIRE	UP	80	CTR	64
		1713	420	1440	A-1-OUT	C3-D1	TIRE	UP	100	CTR	38
		1817*	420	1440	C-1-OUT	C3-D1	TIRE	UP	100	CTR	26
		1909	420	1440	A-2-OUT	C3-D1	TIRE	UP	100	CTR	26
		2021	420	1440	C-2-OUT	C3-D1	TIRE	UP	120	CTR	26
		2113	420	1440	E-2-OUT	C3-D1	TIRE	UP	120	CTR	26
380/85R30	675	1594	420	1440	E-2-IN	D4-E2	CTR	DOWN	60	CTR	80
		1696	420	1440	C-2-IN	D4-E2	CTR	DOWN	60	CTR	52
		1798*	420	1440	A-2-IN	D4-E2	CTR	DOWN	80	CTR	33
		1900	420	1440	D-1-OUT	D4-E2	TIRE	DOWN	80	CTR	26
		2000	420	1440	B-2-OUT	D4-E2	TIRE	DOWN	80	CTR	26
		2102	420	1440	D-2-OUT	D4-E2	TIRE	DOWN	100	CTR	26
380/85R34	725	1511	420	1440	D-1-IN	C4-D2	TIRE	DOWN	40	CTR	111**
		1613	420	1440	B-1-IN	C4-D2	TIRE	DOWN	40	CTR	90
		1713	420	1440	A-1-OUT	C4-D2	TIRE	DOWN	40	CTR	68
		1815*	420	1440	C-1-OUT	C4-D2	TIRE	DOWN	40	CTR	47
		1917	420	1440	A-2-OUT	C4-D2	TIRE	DOWN	40	CTR	32
		2019	420	1440	C-2-OUT	C4-D2	TIRE	DOWN	60	CTR	26
		2121	420	1440	E-2-OUT	C4-D2	TIRE	DOWN	60	CTR	N/A
420/70R28	650	1713	420	1440	E-2-IN	C3-D1	TIRE	UP	100	CTR	33
		1817*	420	1440	B-1-OUT	C3-D1	TIRE	UP	100	CTR	26
		1909	420	1440	D-1-OUT	C3-D1	TIRE	UP	100	CTR	26
		2021	420	1440	B-2-OUT	C3-D1	TIRE	UP	120	CTR	26
		2113	420	1440	D-2-OUT	C3-D1	TIRE	UP	120	CTR	26
420/85R24	625	1714	480	1440	E-2-IN	C4-D2	TIRE	UP	120	OUT	40
		1818*	480	1440	B-1-OUT	C4-D2	TIRE	UP	120	OUT	40
		1910	480	1440	D-1-OUT	C4-D2	TIRE	UP	120	OUT	26
		2022	480	1440	B-2-OUT	C4-D2	TIRE	UP	150	OUT	26
		2114	480	1440	D-2-OUT	C4-D2	TIRE	UP	150	OUT	26
420/85R28	675	1712	480	1440	C-2-IN	D4-E2	CTR	DOWN	60	OUT	62
		1816*	480	1440	B-1-OUT	D4-E2	TIRE	DOWN	80	OUT	38
		1908	480	1440	D-1-OUT	D4-E2	TIRE	DOWN	80	OUT	31
		2020	480	1440	B-2-OUT	D4-E2	TIRE	DOWN	80	OUT	26
		2112	480	1440	D-2-OUT	D4-E2	TIRE	DOWN	100	OUT	26
420/85R30	700	1720	480	1440	D-2-IN	D3-E1	TIRE	DOWN	40	OUT	69
		1812	480	1440	B-1-OUT	D3-E1	TIRE	DOWN	60	OUT	47
		1916*	480	1440	D-1-OUT	D3-E1	TIRE	DOWN	60	OUT	32
		2016	480	1440	B-2-OUT	D3-E1	TIRE	DOWN	60	OUT	26
		2120	480	1440	D-2-OUT	D3-E1	TIRE	DOWN	80	OUT	26
420/90R30	725	1511	480	1440	E-1-IN	C4-D2	TIRE	DOWN	40	OUT	118**
		1613	480	1440	C-1-IN	C4-D2	TIRE	DOWN	40	OUT	99**
		1713	480	1440	E-2-IN	C4-D2	TIRE	DOWN	40	OUT	77
		1815*	480	1440	B-1-OUT	C4-D2	TIRE	DOWN	40	OUT	54
		1917	480	1440	D-1-OUT	C4-D2	TIRE	DOWN	40	OUT	49
		2019	480	1440	B-2-OUT	C4-D2	TIRE	DOWN	40	OUT	29
		2121	480	1440	D-2-OUT	C4-D2	TIRE	DOWN	60	OUT	26
440/80R28	675	1712	480	1440	D-2-IN	D4-E2	CTR	DOWN	60	OUT	65
		1816	480	1440	B-1-OUT	D4-E2	TIRE	DOWN	80	OUT	40
		1908	480	1440	C-1-OUT	D4-E2	TIRE	DOWN	80	OUT	29
		2020	480	1440	B-2-OUT	D4-E2	TIRE	DOWN	80	OUT	26
		2112	480	1440	C-2-OUT	D4-E2	TIRE	DOWN	100	OUT	26
480/65R28	650	1713	480	1440	B-1-IN	C4-D2	TIRE	UP	100	OUT	59
		1817*	480	1440	A-1-OUT	C4-D2	TIRE	UP	120	OUT	32
		1909	480	1440	C-1-OUT	C4-D2	TIRE	UP	120	OUT	30
		2021	480	1440	A-2-OUT	C4-D2	TIRE	UP	120	OUT	26
		2113	480	1440	C-2-OUT	C4-D2	TIRE	UP	150	OUT	26
480/70R24	625	1714	480	1440	B-1-IN	C4-D2	TIRE	UP	100	OUT	46
		1818*	480	1440	A-1-OUT	C4-D2	TIRE	UP	120	OUT	26
		1910	480	1440	B-2-IN	C4-D2	TIRE	UP	120	OUT	26
		2022	480	1440	A-2-OUT	C4-D2	TIRE	UP	120	OUT	26
		2114	480	1440	C-2-OUT	C4-D2	TIRE	UP	150	OUT	26
480/70R28	675	1620	480	1440	B-1-IN	D5-E3	CTR	DOWN	80	OUT	93
		1712	480	1440	E-2-IN	D5-E3	CTR	UP	0	OUT	69
		1816*	480	1440	A-1-OUT	D5-E3	TIRE	UP	0	OUT	40
		1908	480	1440	C-1-OUT	D5-E3	TIRE	UP	0	OUT	41
		2020	480	1440	A-2-OUT	D5-E3	TIRE	UP	0	OUT	26
		2112	480	1440	C-2-OUT	D5-E3	TIRE	UP	40	OUT	26
480/70R30	700	1720	480	1440	D-2-IN	D4-E2	CTR	DOWN	60	OUT	76
		1812	480	1440	A-1-OUT	D4-E2	TIRE	DOWN	80	OUT	50
		1916*	480	1440	C-1-OUT	D4-E2	TIRE	DOWN	80	OUT	33
		2016	480	1440	A-2-OUT	D4-E2	TIRE	DOWN	80	OUT	28
		2120	480	1440	C-2-OUT	D4-E2	TIRE	DOWN	100	OUT	26
540/65R24	625	1818	540	1540	D-2-IN	D4-E2	CTR	UP	180	CTR	46
		1910	540	1540	B-2-IN	D4-E2	CTR	UP	180	CTR	26
		2022	540	1540	C-1-OUT	D4-E2	TIRE	UP	180	CTR	26
		2114	540	1540	A-2-OUT	D4-E2	TIRE	UP	200	CTR	26
540/65R28	675	1712	540	1540	B-1-IN	D5-E3	CTR	UP	100	CTR	88
		1816*	540	1540	D-2-IN	D5-E3	CTR	UP	100	CTR	61
		1908	540	1540	B-2-IN	D5-E3	CTR	UP	120	CTR	38
		2020	540	1540	C-1-OUT	D5-E3	TIRE	UP	120	CTR	30
		2112	540	1540	A-2-OUT	D5-E3	TIRE	UP	120	CTR	26
540/65R30	700	1812	540	1540	D-2-IN	D4-E2	CTR	UP	80	CTR	71
		1916*	540	1540	B-1-OUT	D4-E2	TIRE	UP	100	CTR	45
		2016	540	1540	D-1-OUT	D4-E2	TIRE	UP	100	CTR	31
		2120	540	1540	A-2-OUT	D4-E2	TIRE	UP	100	CTR	26
540/75R28	700	1910*	540	1540	C-2-IN	C4-D2	TIRE	UP	40	CTR	57
600/65R28	700	1756	620	1560	C-1-IN	D3-E1	TIRE	UP	60	OUT	153**
		1776	620	1560	C-1-IN	D3-E1	TIRE	UP	60	OUT	135**
		1880*	620	1560	E-2-IN	D3-E1	TIRE	UP	60	OUT	122**
		2052	620	1560	A-2-IN	D3-E1	TIRE	UP	80	OUT	103**
		2156	620	1560	A-2-OUT	D3-E1	TIRE	UP	80	OUT	72
VF 520/60R28	650	1815*	540	1540	E-2-IN	D3-E1	TIRE	UP	150	CTR	26
VF 600/60R28	675	1904*	620	1560	C-2-IN	D4-E2	CTR	UP	80	OUT	106**
VF 600/60R30	700	1904*	620	1560	D-2-IN	D3-E1	TIRE	UP	60	OUT	111**
* Tread width setting on delivery. Recommended tread width with front loader operation. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127.