Two-Piece Front Axle — Adjust the Pivoting Fenders and Steering Stop - Front Axle 755HD

IMPORTANT: Observe the following points in this Section:

• “Two-Piece Front Axle — Notes on Adjusting the Fenders”

• “Two-Piece Front Axle — Notes on Adjusting the Steering Stop”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor.

IMPORTANT: A depth of at least 10 mm (0.394 in.) to which the steering stops are screwed in, or five screw rotations, needs to be ensured.

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Prevent Front Wheel or Fender Contact with Tractor Components” in this Section.

IMPORTANT: For setting values for steering stop with two **, the tread width and adjustment of the steering stop is possible only with steering stop AL180127.

NOTE: For front loader work, select a tread width between 1750 - 1950 mm (68.9 - 76.8 in.). The recommended tread widths are listed in the table and marked by an asterisk (*).

Tire size	SRI [mm]	Tread width [mm]	Fenders		Positions at which fender can be installed						Steering Stop [mm]
			Width [mm]	Length [mm]	I	II	III	IV	V [mm]	VI
16.9R30	700	1720	480	1440	E-2-IN	D3-E1	TIRE	DOWN	0	OUT	70
		1812	480	1440	B-1-OUT	D3-E1	TIRE	DOWN	0	OUT	48
		1916*	480	1440	D-1-OUT	D3-E1	TIRE	DOWN	0	OUT	34
		2016	480	1440	B-2-OUT	D3-E1	TIRE	DOWN	0	OUT	27
		2120	480	1440	D-2-OUT	D3-E1	TIRE	DOWN	0	OUT	25
16.9R30/R2	725	1511	480	1440	E-1-IN	C4-D2	TIRE	DOWN	0	OUT	115**
		1613	480	1440	C-1-IN	C4-D2	TIRE	DOWN	0	OUT	95
		1713	480	1440	E-2-IN	C4-D2	TIRE	DOWN	0	OUT	73
		1815*	480	1440	B-1-OUT	C4-D2	TIRE	DOWN	0	OUT	48
		1917	480	1440	D-1-OUT	C4-D2	TIRE	DOWN	0	OUT	34
		2019	480	1440	B-2-OUT	C4-D2	TIRE	DOWN	0	OUT	27
		2121	480	1440	D-2-OUT	C4-D2	TIRE	DOWN	0	OUT	25
18.4R30	725	1719	480	1440	E-2-IN	C3-D1	TIRE	DOWN	0	OUT	84
		1811	480	1440	C-2-IN	C3-D1	TIRE	DOWN	0	OUT	64
		1915*	480	1440	A-2-IN	C3-D1	TIRE	DOWN	0	OUT	44
		2015	480	1440	A-2-OUT	C3-D1	TIRE	DOWN	0	OUT	34
		2119	480	1440	D-2-OUT	C3-D1	TIRE	DOWN	0	OUT	27
320/85R38	725	1513	370	1280	B-1-IN	C4-D2	TIRE	DOWN	0	IN	96**
		1601	370	1280	E-2-IN	C4-D2	TIRE	DOWN	0	IN	76
		1717	370	1280	B-2-IN	C4-D2	TIRE	DOWN	0	IN	50
		1847*	370	1280	A-2-OUT	C4-D2	TIRE	DOWN	0	IN	34
		1919	370	1280	B-2-OUT	C4-D2	TIRE	DOWN	0	IN	27
		2021	370	1280	D-2-OUT	C4-D2	TIRE	DOWN	0	IN	25
		2123	370	1280	E-2-OUT	C4-D2	TIRE	DOWN	0	IN	25
380/80R38	750	1512	420	1440	D-1-IN	C3-D1	TIRE	DOWN	0	CTR	110**
		1600	420	1440	B-1-IN	C3-D1	TIRE	DOWN	0	CTR	95
		1716	420	1440	A-1-OUT	C3-D1	TIRE	DOWN	0	CTR	71
		1846*	420	1440	A-2-IN	C3-D1	TIRE	DOWN	0	CTR	46
		1918	420	1440	A-2-OUT	C3-D1	TIRE	DOWN	0	CTR	38
		2020	420	1440	C-2-OUT	C3-D1	TIRE	DOWN	0	CTR	29
		2122	420	1440	E-2-OUT	C3-D1	TIRE	DOWN	0	CTR	25
380/85R34	725	1511	420	1440	D-1-IN	C4-D2	TIRE	DOWN	0	CTR	108**
		1613	420	1440	B-1-IN	C4-D2	TIRE	DOWN	0	CTR	87
		1713	420	1440	A-1-OUT	C4-D2	TIRE	DOWN	0	CTR	64
		1815*	420	1440	C-1-OUT	C4-D2	TIRE	DOWN	0	CTR	42
		1917	420	1440	A-2-OUT	C4-D2	TIRE	DOWN	0	CTR	31
		2019	420	1440	C-2-OUT	C4-D2	TIRE	DOWN	0	CTR	25
		2121	420	1440	E-2-OUT	C4-D2	TIRE	DOWN	0	CTR	25
420/85R30	700	1720	480	1440	D-2-IN	D3-E1	TIRE	DOWN	0	OUT	68
		1812	480	1440	B-2-IN	D3-E1	TIRE	DOWN	0	OUT	44
		1916*	480	1440	D-1-OUT	D3-E1	TIRE	DOWN	0	OUT	31
		2016	480	1440	B-2-OUT	D3-E1	TIRE	DOWN	0	OUT	25
		2120	480	1440	D-2-OUT	D3-E1	TIRE	DOWN	0	OUT	25
420/85R34	750	1510	480	1440	E-1-IN	C3-D1	TIRE	DOWN	0	OUT	117**
		1612	480	1440	B-1-IN	C3-D1	TIRE	DOWN	0	OUT	100**
		1712	480	1440	D-2-IN	C3-D1	TIRE	DOWN	0	OUT	81
		1814*	480	1440	B-2-IN	C3-D1	TIRE	DOWN	0	OUT	59
		1916	480	1440	D-1-OUT	C3-D1	TIRE	DOWN	0	OUT	44
		2018	480	1440	B-2-OUT	C3-D1	TIRE	DOWN	0	OUT	34
		2120	480	1440	D-2-OUT	C3-D1	TIRE	DOWN	0	OUT	27
420/90R30	725	1511	480	1440	E-1-IN	C4-D2	TIRE	DOWN	0	OUT	115**
		1613	480	1440	C-1-IN	C4-D2	TIRE	DOWN	0	OUT	96**
		1713	480	1440	E-2-IN	C4-D2	TIRE	DOWN	0	OUT	75
		1815*	480	1440	B-2-IN	C4-D2	TIRE	DOWN	0	OUT	51
		1917	480	1440	D-1-OUT	C4-D2	TIRE	DOWN	0	OUT	36
		2019	480	1440	B-2-OUT	C4-D2	TIRE	DOWN	0	OUT	29
		2121	480	1440	D-2-OUT	C4-D2	TIRE	DOWN	0	OUT	25
460/85R30	725	1719	480	1440	E-2-IN	C3-D1	TIRE	DOWN	0	OUT	84
		1811	480	1440	C-2-IN	C3-D1	TIRE	DOWN	0	OUT	64
		1915*	480	1440	A-2-IN	C3-D1	TIRE	DOWN	0	OUT	44
		2015	480	1440	A-2-OUT	C3-D1	TIRE	DOWN	0	OUT	34
		2119	480	1440	D-2-OUT	C3-D1	TIRE	DOWN	0	OUT	27
480/70R30	700	1720	480	1440	D-2-IN	D4-E2	CTR	DOWN	0	OUT	73
		1812	480	1440	A-1-OUT	D4-E2	TIRE	DOWN	0	OUT	50
		1916*	480	1440	C-1-OUT	D4-E2	TIRE	DOWN	0	OUT	31
		2016	480	1440	A-2-OUT	D4-E2	TIRE	UP	0	OUT	29
		2120	480	1440	C-2-OUT	D4-E2	TIRE	UP	0	OUT	25
480/70R34	750	1612	480	1440	D-1-IN	C3-D1	TIRE	DOWN	0	OUT	110**
		1712	480	1440	B-1-IN	C3-D1	TIRE	DOWN	0	OUT	92
		1814*	480	1440	A-1-OUT	C3-D1	TIRE	DOWN	0	OUT	71
		1916	480	1440	C-1-OUT	C3-D1	TIRE	DOWN	0	OUT	50
		2018	480	1440	A-2-OUT	C3-D1	TIRE	DOWN	0	OUT	44
		2120	480	1440	C-2-OUT	C3-D1	TIRE	DOWN	0	OUT	34
540/65R30	700	1812	540	1540	D-2-IN	D4-E2	CTR	UP	0	CTR	70
		1916*	540	1540	B-1-OUT	D4-E2	TIRE	UP	0	CTR	42
		2016	540	1540	D-1-OUT	D4-E2	TIRE	UP	0	CTR	31
		2120	540	1540	B-2-OUT	D4-E2	TIRE	UP	0	CTR	27
600/65R28	700	1756	620	1560	C-1-IN	D3-E1	TIRE	UP	0	OUT	99**
		1776	620	1560	C-1-IN	D3-E1	TIRE	UP	0	OUT	95
		1880*	620	1560	E-2-IN	D3-E1	TIRE	UP	0	OUT	70
		2002	620	1560	B-2-IN	D3-E1	TIRE	UP	0	OUT	60
		2052	620	1560	A-2-IN	D3-E1	TIRE	UP	0	OUT	36
		2156	620	1560	A-2-OUT	D3-E1	TIRE	UP	0	OUT	29
600/65R30	725	1755	620	1895	C-1-IN	C3-D1	TIRE	UP	0	OUT	103**
		1775	620	1895	C-1-IN	C3-D1	TIRE	UP	0	OUT	99**
		1879*	620	1895	E-2-IN	C3-D1	TIRE	UP	0	OUT	78
		2002	620	1895	B-2-IN	C3-D1	TIRE	UP	0	OUT	68
		2051	620	1895	A-2-IN	C3-D1	TIRE	UP	0	OUT	42
		2155	620	1895	A-2-OUT	C3-D1	TIRE	UP	0	OUT	34
600/70R28	725	1755	620	1895	C-1-IN	C3-D1	TIRE	UP	0	OUT	104**
		1775	620	1895	C-1-IN	C3-D1	TIRE	UP	0	OUT	100**
		1879*	620	1895	E-2-IN	C3-D1	TIRE	UP	0	OUT	78
		2002	620	1895	B-2-IN	C3-D1	TIRE	UP	0	OUT	69
		2051	620	1895	A-2-IN	C3-D1	TIRE	UP	0	OUT	42
		2155	620	1895	A-2-OUT	C3-D1	TIRE	UP	0	OUT	34
600/70R30	750	1754	620	1895	C-1-IN	B4-C2	TIRE	UP	0	OUT	108**
		1774	620	1895	C-1-IN	B4-C2	TIRE	UP	0	OUT	104**
		1878*	620	1895	E-2-IN	B4-C2	TIRE	UP	0	OUT	84
		2050	620	1895	A-2-IN	B4-C2	TIRE	UP	0	OUT	50
		2154	620	1895	A-2-OUT	B4-C2	TIRE	UP	0	OUT	40
VF 600/60R30	700	1904*	620	1560	D-2-IN	D3-E1	TIRE	UP	0	OUT	63
		2002	620	1560	B-2-IN	D3-E1	TIRE	UP	0	OUT	55
* Tread width setting on delivery. Recommended tread width with front loader operation. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127.