Three-Piece Front Axle (Version 1) — Adjust the Pivoting Fenders and Steering Stop - 750 (M60LD) und 755HD (M60)

IMPORTANT: Observe the following points in this Section:

• “Three-Piece Front Axle (Version 1) — Overview of Axle Category and Axle Type”

• “Three-Piece Front Axle (Version 1) — Notes on Adjusting the Fenders”

• “Three-Piece Front Axle (Version 1) — Notes on Adjusting the Steering Stop”

• Refer to the “Tire Combinations” for the front wheels authorized for the tractor.

• If the setting values for the steering stop are between 55 mm and 105 mm, an L218706 bushing must be placed between the lock nut and housing.

IMPORTANT: A depth of at least 10 mm (0.4 in.) to which the steering stops are screwed in must be ensured.

• Adjust the steering stops to prevent the wheels from coming into contact with tractor components. See also “Prevent Front Wheel or Fender Contact with Tractor Components” in this Section.

• Set the shut-off angle for the automatic engagement and disengagement of the front-wheel drive. See “Engage Front-Wheel Drive” in the “Operate the Tractor — General” Section.

IMPORTANT: For setting values for steering stop with two **, the tread width and adjustment of the steering stop is possible only with steering stop AL180127.

NOTE: For front loader work, select a tread width between 1750 - 1950 mm (68.9 - 76.8 in.). The recommended tread widths are listed in the table and marked by an asterisk (*).

Tire size	SRI [mm]	Tread width [mm]	Fenders		Positions at which pivoting fender can be installed Three-Piece Front Axle (Version 1) 750 (M60LD) and 755HD (M60)					Steering stop [mm]
			Width [mm]	Length [mm]	I	II	III	IV	V
16.9R28	675	1582	480	1440	A-2-IN	TIRE	C3-D1	UP	OUT	115**
		1684	480	1440	B-2-IN	TIRE	C3-D1	UP	OUT	95
		1785	480	1440	B-1-IN	TIRE	C3-D1	UP	OUT	70
		1886*	480	1440	D-1-IN	TIRE	C3-D1	UP	OUT	55
		1988	480	1440	A-2-OUT	TIRE	C3-D1	UP	OUT	35
		2090	480	1440	C-2-OUT	TIRE	C3-D1	UP	OUT	35
16.9R30	700	1620	480	1440	A-2-IN	TIRE	B3-C1	UP	OUT	110**
		1752	480	1440	A-1-IN	TIRE	B3-C1	UP	OUT	85
		1856*	480	1440	C-1-IN	TIRE	B3-C1	UP	OUT	65
		2020	480	1440	B-2-OUT	TIRE	B3-C1	UP	OUT	35
		2124	480	1440	D-2-OUT	TIRE	B3-C1	UP	OUT	35
320/85R38	725	1584	370	1280	B-2-IN	TIRE	B3-C1	UP	IN	100
		1654	370	1280	B-1-IN	TIRE	B3-C1	UP	IN	85
		1788	370	1280	A-1-OUT	TIRE	B3-C1	UP	IN	60
		1860*	370	1280	A-2-OUT	TIRE	B3-C1	UP	IN	45
		1990	370	1280	C-2-OUT	TIRE	B3-C1	UP	IN	35
		2020	370	1280	D-2-OUT	TIRE	B3-C1	UP	IN	35
		2092	370	1280	E-2-OUT	TIRE	B3-C1	UP	IN	35
380/80R38	750	1594	420	1440	A-2-IN	TIRE	A4-B2	UP	CTR	110**
		1702	420	1440	B-1-IN	TIRE	A4-B2	UP	CTR	90
		1785*	420	1440	C-1-IN	TIRE	A4-B2	UP	CTR	75
		1892	420	1440	B-1-OUT	TIRE	A4-B2	UP	CTR	55
		1988	420	1440	B-2-OUT	TIRE	A4-B2	UP	CTR	35
		2090	420	1440	D-2-OUT	TIRE	A4-B2	UP	CTR	35
		2192	420	1440	E-2-OUT	TIRE	A4-B2	UP	CTR	35
380/85R34	725	1582	420	1440	A-2-IN	TIRE	B3-C1	UP	CTR	80
		1684	420	1440	A-1-IN	TIRE	B3-C1	UP	CTR	60
		1786	420	1440	C-1-IN	TIRE	B3-C1	UP	CTR	70
		1886*	420	1440	B-1-OUT	TIRE	B3-C1	UP	CTR	50
		1988	420	1440	B-2-OUT	TIRE	B3-C1	UP	CTR	35
		2090	420	1440	D-2-OUT	TIRE	B3-C1	UP	CTR	35
		2192	420	1440	E-2-OUT	TIRE	B3-C1	UP	CTR	35
420/85R30	700	1620	480	1440	A-2-IN	TIRE	B3-C1	UP	OUT	110**
		1752	480	1440	A-1-IN	TIRE	B3-C1	UP	OUT	80
		1856*	480	1440	C-1-IN	TIRE	B3-C1	UP	OUT	60
		2020	480	1440	B-2-OUT	TIRE	B3-C1	UP	OUT	35
		2124	480	1440	D-2-OUT	TIRE	B3-C1	UP	OUT	35
420/85R34	750	1594	480	1440	A-2-IN	TIRE	A3-B1	UP	OUT	120**
		1702	480	1440	A-1-IN	TIRE	A3-B1	UP	OUT	100
		1785*	480	1440	B-1-IN	TIRE	A3-B1	UP	OUT	85
		1892	480	1440	A-1-OUT	TIRE	A3-B1	UP	OUT	60
		1988	480	1440	A-2-OUT	TIRE	A3-B1	UP	OUT	45
		2090	480	1440	C-2-OUT	TIRE	A3-B1	UP	OUT	35
		2192	480	1440	E-2-OUT	TIRE	A3-B1	UP	OUT	35
420/90R30	725	1582	480	1440	A-2-IN	TIRE	B3-C1	UP	OUT	90
		1684	480	1440	B-2-IN	TIRE	B3-C1	UP	OUT	100
		1786	480	1440	B-1-IN	TIRE	B3-C1	UP	OUT	80
		1886*	480	1440	D-1-IN	TIRE	B3-C1	UP	OUT	60
		1988	480	1440	A-2-OUT	TIRE	B3-C1	UP	OUT	40
		2090	480	1440	C-2-OUT	TIRE	B3-C1	UP	OUT	35
		2192	480	1440	E-2-OUT	TIRE	B3-C1	UP	OUT	35
460/85R30	725	1620	480	1440	A-2-IN	TIRE	A4-B2	UP	OUT	120**
		1752	480	1440	A-1-IN	TIRE	A4-B2	UP	OUT	95
		1856*	480	1440	D-1-IN	TIRE	A4-B2	UP	OUT	75
		2020	480	1440	B-2-OUT	TIRE	A4-B2	UP	OUT	45
		2124	480	1440	D-2-OUT	TIRE	A4-B2	UP	OUT	35
480/70R30	700	1620	480	1440	A-2-IN	TIRE	B4-C2	UP	OUT	115**
		1752	480	1440	A-1-IN	TIRE	B4-C2	UP	OUT	90
		1856*	480	1440	C-1-IN	TIRE	B4-C2	UP	OUT	70
		2020	480	1440	B-2-OUT	TIRE	B4-C2	UP	OUT	40
		2124	480	1440	D-2-OUT	TIRE	B4-C2	UP	OUT	35
480/70R34	750	1580	480	1440	A-2-IN	TIRE	A3-B1	UP	OUT	135**
		1688	480	1440	B-2-IN	TIRE	A3-B1	UP	OUT	115**
		1782	480	1440	B-1-IN	TIRE	A3-B1	UP	OUT	95
		1890*	480	1440	D-1-IN	TIRE	A3-B1	UP	OUT	75
		1986	480	1440	A-2-OUT	TIRE	A3-B1	UP	OUT	55
		2094	480	1440	C-2-OUT	TIRE	A3-B1	UP	OUT	35
540/65R30	700	1752	540	1540	B-2-IN	TIRE	B3-C1	UP	CTR	105
		1856*	540	1540	B-1-IN	TIRE	B3-C1	UP	CTR	85
		2020	540	1540	B-1-OUT	TIRE	B3-C1	UP	CTR	55
		2124	540	1540	B-2-OUT	TIRE	B3-C1	UP	CTR	35
600/65R28	700	1620	620	1560	A-2-IN	TIRE	B3-C1	UP	OUT	145**
		1752	620	1560	A-2-IN	TIRE	B3-C1	UP	OUT	120**
		1856*	620	1560	A-1-IN	TIRE	B3-C1	UP	OUT	100
		2020	620	1560	A-1-OUT	TIRE	B3-C1	UP	OUT	65
		2124	620	1560	A-2-OUT	TIRE	B3-C1	UP	OUT	45
600/65R30	725	1620	620	1895	A-2-IN	TIRE	A4-B2	UP	OUT	150**
		1752	620	1895	A-2-IN	TIRE	A4-B2	UP	OUT	120**
		1856*	620	1895	A-1-IN	TIRE	A4-B2	UP	OUT	100
		2020	620	1895	A-1-OUT	TIRE	A4-B2	UP	OUT	70
		2124	620	1895	A-2-OUT	TIRE	A4-B2	UP	OUT	50
600/70R28	725	1620	620	1895	A-2-IN	TIRE	A4-B2	UP	OUT	150**
		1752	620	1895	A-2-IN	TIRE	A4-B2	UP	OUT	125**
		1856*	620	1895	A-1-IN	TIRE	A4-B2	UP	OUT	105
		2020	620	1895	A-1-OUT	TIRE	A4-B2	UP	OUT	80
		2124	620	1895	A-2-OUT	TIRE	A4-B2	UP	OUT	50
600/70R30	750	1620	620	1895	A-2-IN	TIRE	A3-B1	UP	OUT	150**
		1752	620	1895	A-2-IN	TIRE	A3-B1	UP	OUT	125**
		1856*	620	1895	A-1-IN	TIRE	A3-B1	UP	OUT	105
		2020	620	1895	A-1-OUT	TIRE	A3-B1	UP	OUT	75
		2124	620	1895	A-2-OUT	TIRE	A3-B1	UP	OUT	55
VF 600/60R30	700	2024	620	1560	D-1-IN	TIRE	B3-C1	UP	OUT	65
		1856*	620	1560	A-1-IN	TIRE	B3-C1	UP	OUT	100
* Tread width setting on delivery. Recommended tread width with front loader operation. ** Tread width and adjustment of the steering stop is possible only with steering stop AL180127.