Lighting System - Worklights of ISOBUS Implement

LX1057055
LX1057055-UN-22JAN14

Side Console

LX1057016
LX1057016-UN-21JAN14

CommandARM™

LX1057056
LX1057056-UN-22JAN14

CommandARM™

LX1057057
LX1057057-UN-12JUL13

Switch Worklights On

LX1057058
LX1057058-UN-12JUL13

Switch High-Beam Headlights On

A - Light Button

B - Button for Light Combination 1

C - Button for Light Combination 2

D - Light Switch, Worklights ON

E - High/Low-Beam Headlight Switch


CAUTION: It is not permitted to use worklights on public roads.

NOTE: On tractors with ISOBUS, the road lights and worklights of the implement can be controlled via the ISOBUS socket. For more information, see the operator's manual of the relevant ISOBUS implement.

There are four different customized lighting options to operate the worklights of the ISOBUS implement. These lighting options can be assigned and saved through the input box of diagnostic addresses TEC 000031 to TEC 000034. See also "TEC - Control Software" in Section "Diagnostic Trouble Codes and Customization".

If several worklights are to be operated together within a customized lighting option the corresponding digit in the input box must be set to "1".

0000001

Additional implement worklights, option 2

X

0000010

Additional implement worklights, option 1

 

0000100

Implement worklight, front right

X

0001000

Implement worklight, front left

X

0010000

Implement worklight, right side

 

0100000

Implement worklight, left side

 

1000000

Implement worklights, rear

X

Example:

The following worklights (X) shall be on:

  • Additional implement worklights, option 2
  • Worklight, front right
  • Worklight, front left
  • Worklight, rear

Enter 1001101 into the input box.

Switching on one of the four customized lighting options is done by using the following switch combinations:

 

Switch Positions

Lighting option

I

II

III

IV

Diagnostic address

TEC 000031

TEC 000032

TEC 000033

TEC 000034

Key switch position

On

On

On

On

Position of light switch

(D)

(D)

(D)

(D)

Position of high/low-beam headlight switch (E)

Low beam

High beam

Low beam

High beam

Select button for worklights 1 or 2

(B)

(B)

(C)

(C)

OULXA64,000377F-19-20150522