RTP - Functions of the Multi-Function Lever

LX211115-UN-05MAY14

IMPORTANT: The return-to-position function can be stopped by moving the multi-function lever briefly in the opposite direction. Example: Stop the boom while it is moving downward = Move the multi-function lever to the rear (A).

A	Set top boom position manually. Pull the multi-function lever back until the boom is raised to the desired height. Do not move the multi-function lever beyond the point of resistance.
B	Pull the multi-function lever back until it is beyond the point of perceptible resistance. This initiates the return-to-position function for the top position. The boom stops automatically at the preset top position. While the boom is moving towards the preset top position, the lever may be moved back to its neutral position. The operator's hand must remain on the lever until the procedure has been completed (European edition only).
C	Set top bucket position manually. Move the multi-function lever to the left until the bucket reaches the desired position. Do not move the lever beyond the kiss pressure.
D	Pull the multi-function lever to the left until it is beyond the point of perceptible resistance. This initiates the return-to-position function for the top position. The bucket stops automatically at the preset top position. While the bucket is moving towards the preset position, the lever may be moved back to its neutral position. The operator's hand must remain on the lever until the procedure has been completed (not for North America). Bucket shake function: Move the multi-function lever to the left twice in brief succession beyond the point of resistance and hold it there. This activates the bucket shake function.
E	Set bottom boom position manually. Push the multi-function lever forward until the boom is lowered to the desired height. Do not move the lever beyond the kiss pressure.
F	Push the multi-function lever forward until it is beyond the point of perceptible resistance. This initiates the return-to-position function for the bottom position. The boom stops automatically at the preset bottom position. While the boom is moving towards the preset top position, the lever may be moved back to its neutral position. The operator's hand must remain on the lever until the procedure has been completed (European edition only).
G	Push the multi-function lever all the way forward and engage in detent to activate the boom float position. The lever remains in the detent until it is pulled back by hand.
H	Set bottom bucket position manually. Press the multi-function lever to the right until the bucket has been lowered to the desired height. Do not move the lever beyond the kiss pressure.
I	Move the multi-function lever to the right until it is beyond the point of perceptible resistance. This initiates the return-to-position function for the bottom position. The bucket stops automatically at the preset bottom position. While the bucket is moving towards the preset position, the lever may be moved back to its neutral position. The operator's hand must remain on the lever until the procedure has been completed (European version only). Bucket shake function: Move the multi-function lever to the right twice in brief succession beyond the point of resistance and hold it there. This activates the bucket shake function.
J	Move multi-function lever all the way to the right and engage in detent to activate the bucket float position. The lever remains in the detent until it is pulled back by hand.
8	Button No. 8 is used to toggle between Range A and Range B and back again.