Selective Control Valves - Disconnect Hydraulic Hoses

LX266990
LX266990-UN-10OCT16

LX234582
LX234582-UN-19MAR15

LX234608
LX234608-UN-24MAR15

LX234609
LX234609-UN-24MAR15

LX234610
LX234610-UN-24MAR15

A - SCV Locking Lever

B - Locking Ring, Mechanical Multi-Function Lever

C - Lock Button, Electronic Multi-Function Lever

D - Identification Number

E - Retract Coupler

F - Retract Icon

G - Extend Icon

H - Extend Coupler

CAUTION: Avoid personal injury. Before implements are detached, hydraulic hoses are disconnected, and to avoid unintentional implement movement, observe the following:

• Lower implements to the ground.

• Set selective control valve controls to neutral position and lock them.

  1. Lower implement to ground.

  2. With the ignition on or with the engine running, bring the selective control valves briefly into the "Extend" and "Retract" positions.

  3. Lock out SCV controls:

    • Bring the SCV control lever into the neutral position and lock with the levers (A).
    • Turn locking ring (B) to the right to lock the multi-function lever (mechanical)1.
    • Press lock button (C) for multi-function lever (electrical)1.

  4. Switch off the engine and engage the park lock.

  5. IMPORTANT: Forcing or jerking SCV hoses when disconnecting can damage hose ends and SCV couplers.

    Pull hoses straight out from couplers.

  6. Install dust caps on couplers and tighten them.

1 If equipped

OULXA64,0003626-19-20170117